I am beat. I just completed an expedition legth floor tiling session.

Wednesday night:

Floor tiling gal named Leslie came by and gave me some advise on laying tile and the specific layout for my kitchen. I have been struggling for a week to sort out the pattern and had come up with some complex layout that was just way to busy and would have been unbelievably difficult and who knows how it would have turned out.

She cut straight to the chase. Wlaked right in laid out some tile and said I think this would look and work the best and would be easy to pull off. Completely not complicated but nice pattern.

The money advice; pull out the dishwasher and tile under so that I would tile it in permanently.

Thursday morning:

Drop off Cheryl, Sarah, Mathew, and Kevin at the airport. They are going to the national orienteering interscholastic championships. On the way home stop by pops for a large drill to mix the thinset and then home depot for 10 1/4 inch cement backer board. Home by 9AM and pulling out the dishwasher.

Itquickly became clear that the contractor that built the island with the dishwasher, built it too low. Even though I told them that I would be laying a new floor, they didn't build in enough clearance to add an inch of flooring. I spent a few couple of hours looking at it and trying to make it work. I called the contractor and had my neighbor come over for a look as well. There were two options, rip out another layer of flooring or rip off the new countertop and redo it.

I paid the contract over 15k to build the island and now I have to rip it apart? You ahve got to be kidding. My neighbor pointed out that I should just get the floor done and rip out the counter top later. He was correct. If something goes wrong with it I can remotely shut off the water and not use it. And since the family iss gone this weekend, it is best to make progress and get the floor done.

Last week I was pissed that the contactor overordered the countertop tile by about 80sf. I pulled my ad off craigslist as I will be using it now.

I spent the rest of the day putting done the cement backer board. That stuff is nasty. I must have put down 500 screws. I also got some practice mixing and spreading thinset.

Friday

Tile time. worked about 10 hour and got just over half the tile laid. Mknees are sore and my back is sore. i took some vitamin I and ordered a pizza

3 layers of floor have been ripped up. 180sqf of slate have been washed and sealed. The backer board is sitting alonside the dlate on the back porch. My neighbor came by and suggested that I lay out out some of the tile in our proposed pattern to identify any problems.

That was a real good call. We have five entryways into this room that is L shaped and we planned on doing a diagonal pattern. I looked at it for hours last night and no matter how I spaced them, I just couldn't get it to work. We are going to call in help and get a consult from a pro. I can lay the stuff, I just need to get the pattern dialed.

These two are the finished job.



Below, the wife got home and decided to help out. I was working on my 5th beer and was just supervising at this point. notice the racing stripes. This was the first linoeum layer over the original harwood floor. circa 1920-30?

Laura pulling nails. I have never seen so many nails

I kinda liked this pattern and it matched the paint but Cheryl wouldn't let me keep it. This was the second layer circa 1950

Existing layer circa 1980s?